|
|
|
Page View 29538 |
Product Information : |
|
Product Name: |
|
NEW SUPER DRILL |
|
Product Category: |
|
เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
|
Product Sub-Category: |
|
9. SHOWA TOOL
|
Brand: |
|
SHOWA TOOL |
Product Type : |
|
เครื่องมือ, เครื่องจักรและอุปกรณ์
สินค้า, ผลิตภัณฑ์
|
Short Description : |
|
Deep boring up to 15 times diameter ! |
|
|
|
|
FEATURES
High Reliability and Proven Performance |
SUPER DRILL was put on the market by SHOWA TOOL CO. Since that time, it was continuously improved through in-the-field experientces. In responce to customer's demands, NEW SUPER DRILL has been developed to increase its flexibility, employing a modular system. The basic set consists of a head and a shank. And, extension arbors are added for deeper holes. SUPER DRILL's ease-of-use is further enhanced by this modular construction. |
|
Single Pass, precision boring of 50mm-270mm diameters
|
|
No center drilling or pilot hole required. Super Drill's built-in center drill acts as an axis for precision drilling. New Super drill is available in 10 standard head sizes, A1S-55, A2-65, B-80, C-100, D-120, E-150, F-180, G-210, H-240 and I-270, for drilling 50mm to 270mm diameters. |
|
Specialty of deep hole drilling
|
|
Combination of roughing and finishing blades form small chips, providing efficient chip removal. No pecking or dwelling required, even for deep holes. |
|
Able to drill even in hard metals
|
|
New Super Drill cutting blades are manufactured from sintered HSS, provideing excellent drilling performance even in hard metals. |
|
Reusable blades and center drill
|
|
The cutting edge of New Super Drill consists of a center drill, a roughing(R) blade and a finishing(S) blade. Differnt diameter of holes can be bored by changing blades within the capacity of each drill holder. The blades and center drill can be resharpened which reduces tool cost. |
|
Re-sharpening fixture |
|
Oil ring |
A pair of roughing and finishing blades, can be reshapened utilizing theresharpening fixture on the surface grinder. |
|
|
Oil ring is used to supply coolant through the drill in rotational applications. |
|
|
T/C Guides(for through hole) |
|
Sharpening the blades |
In case of through hole drilling, the drill may vibrate immediately before breaking through, depending on hole diameter, cutting speed and feed rate, and rigidity of the machine spindle. This can result in damage of the cutting blades. Using T/C guides when boring through holes will minimize vibration and help prevent tool damage. |
|
|
1. |
"R" and "S" blades are ground to the same height. |
2. |
Both blades are ground in straight line. making first and second clearance. |
3. |
Grind the center drill to the point angle of 140° with thinning. |
|
|
|
Easy Assembly, Flexible for Various Applications
|
|
|
|
|
|
|
Assembly
|
|
New Super Drill's cutting edge consists of three cutters a roughing(R) blade, a finishing(S) blade and a center drill. This combination of cutters gives outstanding drilling efficiency. |
|
Procedure
|
1. |
Insert the center drill in the center of the head. |
2. |
Clamp the roughing(R) blade in the seat marked with . The inside edge of the roughing blade must contact tightly against the side slot of the center drill, to prevent the center drill turning free. |
3. |
Clamp the finishing(S) blade in the seat marked S. |
4. |
Finaly, tighten the center drill setting screw. |
|
For catalog of NEW SUPER DRILL please send a request to [email protected] |
|
|
|
|
|
|
|