SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L
จำหน่าย นำเข้า ตัวแทน ตัวแทนจำหน่าย ขาย สินค้า SUGIYAMA ELECTRICSYSTEM
Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L
US Series/USD Series/USE Series ~Spring sensor~
Description
The spring sensor is contact type sensor. When a conductive workpiece contacts the sensor rod, the sensor circuit closes and an electric signal flows. Therefore, this sensor can detect touch of only conductive workpiece. The cable for spring type contact sensor of US-1 and USD-1 is 6 kinds of color. Blue, Red, White, Yellow, Pink and Orange are prepared. (US-2 - US-7 and USD-2 - USD-7 are nothing but Red cable and White cable. ) US series and USD series are the same in form except connector. USE-1 and USE-2 are possible to specify the spring diameter, the cable length, connector and others of US-1, US-2, USD-1 and USD-2 by your choice. USE-E series is extension cable for RCA pin-plug.USE-DE series is extension cable for DIN-plug.
US Series Photograph and Dimensions
US series is spring type contact sensor with pin-plug. It gets connected to PS-662, PS-661, PS-104 or PS-101. It is necessary Pin-DIN conversion cable of which connector, cable color and cable length are fixed or USE-DE when connect to PS682. Pin-DIN conversion cable is an included items when purchase PS682. (Note, however, that only if ?01? is selected at the order code of accessory of sensor.)
US series Leaflet
US-1 |
|
Click to enlarge image. US-1 |
US-2 |
|
Click to enlarge image. US-2 |
US-3 |
|
Click to enlarge image. US-3 |
US-4 |
|
Click to enlarge image. US-4 |
US-5 |
|
Click to enlarge image. US-5 |
US-7S |
|
Click to enlarge image. US-7S |
US-7L |
|
Click to enlarge image. US-7L |
USD Series Photograph and Dimensions
USD series is spring type contact sensor with DIN-plug. It gets connected to PS-682. It is necessary USE-E when connect to PS-662, PS-661, PS-104 or PS-101.
USD series Leaflet
USD-1 |
|
Click to enlarge image. USD-1 |
USD-2 |
|
Click to enlarge image. USD-2 |
USD-3 |
|
Click to enlarge image. USD-3 |
USD-4 |
|
Click to enlarge image. USD-4 |
USD-5 |
|
Click to enlarge image. USD-5 |
US-7S |
|
Click to enlarge image. US-7S |
USD-7L |
|
Click to enlarge image. USD-7L |
USE Series
USE series is enlargement spec of spring type contact sensor such as US-1(USD-1), US-2(USD-2). USE-E and USE-DE make the cable of US series, USD series and USE series extend.
USE series Leaflet
USE-DE*Production on orders |
|
|
Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ จำหน่าย นำเข้า ตัวแทน ตัวแทนจำหน่าย ขาย สินค้า SUGIYAMA ELECTRICSYSTEM
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ จำหน่าย นำเข้า ตัวแทน ตัวแทนจำหน่าย ขาย สินค้า SUGIYAMA ELECTRICSYSTEM
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ จำหน่าย นำเข้า ตัวแทน ตัวแทนจำหน่าย ขาย สินค้า SUGIYAMA ELECTRICSYSTEM
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ จำหน่าย นำเข้า ตัวแทน ตัวแทนจำหน่าย ขาย สินค้า SUGIYAMA ELECTRICSYSTEM
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ จำหน่าย นำเข้า ตัวแทน ตัวแทนจำหน่าย ขาย สินค้า SUGIYAMA ELECTRICSYSTEM
SUGIYAMA Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L SUGIYAMA US-1 US-2 US-3 US-4 US-5 US-7S US-7L Spring sensor US-1 US-2 US-3 US-4 US-5 US-7S US-7L Sugiyama ผลิตอุปกรณ์ตรวจจับความผิดปกติในการทำงานของเครื่องตรวจจับโลหะอัตโนมัติทำงานโดยอัตโนมัติ จำหน่าย นำเข้า ตัวแทน ตัวแทนจำหน่าย ขาย สินค้า SUGIYAMA ELECTRICSYSTEM Slug detector
Proximity Sensor head
Malfunction detector
Light sensor
Ring proximity sensor
Contact sensor
Vibration sensor
Digital cam
Mist spray system
Box changer
Transfer detector
Counter
Description
The Slug Detectors PS-482/484/488 are designed for detecting slugs, double piles driving, and so on, during automatic press working and for outputting stop signal to the press in case of abnormalities. It reads a signal from Eddy current proximity sensor installed on the mold for the press and calculate the displacement by a microcomputer. If the displacement exceeds the limit, it outputs the stop signal to the press. Since Ethernet is supported, the PS-482/484/488 can be connected to personal computer (PC) and PLC.
Features
The PS-482/484/488 have the following additional features together with those of our PS-462/464.
Added functions helpful for detection
- - The LCD panel displays sensor waveforms.
- - Sensors can be connected up to eight (8) channels.(PS-488)
- - Unevenness calculation and multiple detection are available.
|
Functions helpful for production control
- - Up to 99 patterns can be Stored.
- - Up to 1000 error histories and displacement for four strokes before and after the error can be saved.
- - Patterns can be recalled by ID tags. (Options)
|
Ethernet supported
- - The contents of setting can be displayed in HTML format.
- - UDP protocol and Telnet protocol enable various settings and operations.
- - FTP protocol enables to output the displacement data during press working.
|
Dimensions
PS-482/484/488
PS-482/484/488
Back view
Specification
|
Item |
Detect |
Channels |
2CH (PS-482) / 4CH (PS-484) / 8CH (PS-488) |
Resolution |
1μm or 0.1μm |
Max. limit value |
200μm or 20.0μm |
Detect mode |
Internal timing, External timing |
Max. SPM |
4000SPM |
Sensor |
Sensor Installation distance (at B.D.C.) |
0.7 to 1.5 mm |
Length of sensor cable |
1 to 10m (Standard 3m) |
Temperature |
0 to 55°C |
Input/Output |
Power source voltage |
100 to 240 VAC ±10%,50/60Hz (Max. 40VA) |
Relay output |
EMG Stop, TDC Stop, READY,ALARM (Max. 250VAC / 30VDC 3.0A) |
External input |
ON/OFF, RESET, LOCK, TIMING (T1, T2, T3) |
Open collector output
|
AUX (5 to 24 VDC 100mA) |
Ethernet |
Physical layer |
10BASE-T/100BASE-TX |
Protocol |
IPv4 UDP?DHCP?HTTP?Telnet?FTP |
Others |
Dimensions of the body |
200(W)× 98.5(H)×190(D) excluding projections |
Weight |
3.0 kgW (inc. mounting bracket) |
Temperature |
0 to 55°C (must not be sudden change while using it) |
Humidity |
35 to 85%RH (no dew condensation allowed) |
Sensor heads
Only the mechanical dimentions are different,the electric characteristic are all the same.
Click on image for more infomation. |
PS-4013 |
PS-4014 |
PS-4018 |
PS-4020 |
PS-4024 |
PS-4025 |
PS-4026 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PS-4027 |
PS-4028 |
PS-4029 |
PS-4031 |
PS-4032 |
PS-4033 |
PS-4034 |
|
|
|
|
|
|
|
Sensor Cable Series of 243297
The colors of the sensor cable are blue, red, yellow, and white.
Description
High-resolution slug detector called AMSTAD(PS-474) can show not only bar graphs but also waveform graphs and plot graphs because we added liquid crystal display to the slug detector with the resolution of 0.1μm developed by the experience of many years. Therefore, it is easy to adjust detection timing which was difficult to adjust up until now by checking waveform and to check a variation of displacement in the graph. In addition, it is not only showing graphs but also recording a waveform data for 8 strokes immediately before the press stops and recording a displacement data constantly.
Features
High-sensitivity sensor with the resolution of 0.1μm
- Detection of slight displacement can be realized in resolution of 0.1μm. Cable compensation is instantly performed according the cable length when connecting the cable and detecting breakage of the cable and stops the press. ????
|
Visualization by a liquid crystal panel
- Easy to understand settings and status of each channel at a glance because of liquid crystal panel. You can also choose display of waveform graph or plot graph and the displayed screen can be saved as is on a USB flash drive as a BMP format. ????
|
Easy to adjust a detection timing
- Because the press motion can be checked with waveforms, the detection timing can be set easily while checking waveforms. The external timing can also be adjusted easily while checking waveforms. ????
|
Data storage on a USB flash drive
- Waveform data for 8 strokes immediately before the press stops can be saved on a USB flash drive in CSV format. Because the displacement data is recorded constantly, it can be saved on a USB flash drive in CSV format with the time specified. ????
|
Feature-rich settings
- Useful settings are available, such as “Trimming limit value”and “Press stop detection” and so on. Setting values can be saved in up to 50 patterns on the internal memory. Moreover they can be saved on a USB flash drive. ????
|
Dimensions
PS-474
PS-474
Specification
Detection |
Number of channels |
4CH |
Resolution |
1μm or 0.1μm |
Max. limit value |
200μm or 20.0μm |
Sensing distance of sensor head |
0.7 - 1.5nm |
Ambient temperature of sensor head |
0 - 55°C |
Type of timing |
Internal timing , External timing |
Length of sensor cable |
Standard 3m |
Max. SPM |
4000SPM |
Record / Storage |
Number of record strokes (Approx.) |
60 million data |
USB flash drive |
Formatted USB flash drive with FAT32 in USB2.0 or less |
External output |
Relay output |
Max. 250VAC / 30VDC 3.0A |
External input |
External?Timing /Operation?Lock / Reset / Monitor |
Connect non-voltage contact or semiconductor switch. Internal voltage (12 VDC) type |
Power supply / Others |
Power source voltage |
AC100V-240V ±10? 50/60Hz |
Power consumption |
peak?60W or less?active?20W or less |
Weight |
3.0kg(Only the main body) |
Size of the body (WHD) |
200×200×190mm (excluding projections) |
Ambient temperature |
0 - 55°C (must not be sudden change while using it) |
Ambient humidity |
35 - 85%RH (no dew condensation allowed) |
Ambient environmental |
No corrosive gas or dust allowed |
Attachments |
Instruction manual 1 Proximity Sensor head 4 The sensor cable 4 Standard bracket 1 Output cable (Standard: 5 m) |
Sensor heads
Only the mechanical dimentions are different,the electric characteristic are all the same.
Click on image for more infomation. |
PS-4013 |
PS-4014 |
PS-4018 |
PS-4020 |
PS-4024 |
PS-4025 |
PS-4026 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PS-4027 |
PS-4028 |
PS-4029 |
PS-4031 |
PS-4032 |
PS-4033 |
PS-4034 |
|
|
|
|
|
|
|
Sensor Cable Series of 243297
The colors of the sensor cable are blue, red, yellow, and white.
Description
In order to accept various dies, we get a lot of sensor heads lined up. All electric property is the same but outside dimension of them are different.
PS-4013 |
Click to enlarge image. PS-4013 |
|
PS-4014 |
Click to enlarge image. PS-4014 |
|
PS-4018 |
Click to enlarge image. PS-4018 |
|
PS-4020 |
Click to enlarge image. PS-4020 |
|
PS-4024 |
Click to enlarge image. PS-4024 |
|
PS-4025 |
Click to enlarge image. PS-4025 |
|
PS-4026 |
Click to enlarge image. PS-4026 |
|
PS-4027 |
Click to enlarge image. PS-4027 |
|
PS-4028 |
Click to enlarge image. PS-4028 |
|
PS-4029 |
Click to enlarge image. PS-4029 |
|
PS-4031 |
Click to enlarge image. PS-4031 |
|
PS-4032 |
Click to enlarge image. PS-4032 |
|
PS-4033 |
Click to enlarge image. PS-4033 |
|
PS-4034 |
Click to enlarge image. PS-4034 |
|
Description
The Malfunction Detector “PS-682” detects the status of automatic pressing, such as material shortage, material feeding, discharge of processed goods, and outputs a stop signal to the press in case of trouble. Several functions using timing signal, such as counting, calculation of work rate, error recording, will assist you in production control. PS-682 supports Ethernet to connect with a personal computer or PLC. It employs DIN connector and remotely operable light sensor can be used. Since a voltage of 12V or 24V is outputted, a 24 V sensor can be used as well as conventional light sensor.
Features
While the features of our “PS-661/662” remain as they are, the following features are added.
Improvement of operability by LCD
- - Detecting method can be freely&
|
|
|