precision-spindle-unit
TERA-TRGS, TRGC, TRGF
- Ultra-precision Unit Sigma Series consist of the inside-diameter grinder, outside-diameter grinder and cutter.
- FAG(Germany) Precision(PAS grade) angular bearing is used and sealed with grease to maintain the fixing rate for long-time-using.
- When and order is taken, we negotiate the contents and ship bearings applied the pre-compressing to fit the purpose.
- Designed for selecting and assembling bearings and pre-compressing.
- Grinding Spindle Unit uses angular bearings for the front and back(DT assembling) and is applied the spring pre-compressing to support uniform load.
- Cutting spindle Unit uses angular bearings for the front and back(DB assembling).
- The balance of a shaft is adjusted to drive even rotation and control the centripetal force.
- We use stainless steel to prevent the rust. The shaft is finished by burning with SUS-420J2.
- The body and the component elements use SUS-416 fundamentally.
tera-trgs
- Accuracy Within 1/?
- Max. speed 15,000rpm
Special order for
We can respond to customers' special requirements, such as appearing in this catalog and in the spindle unit for length, outer diameter, alter or change the shape axis. Designed and manufactured to suit the customer's requirements, the spindle unit is also available. Please contact us if you do not have a device to meet the needs of customers in this catalog spindle. Let's examine whether the production can be applied.
Precision Unit TERA Series
· TERA-Precision Unit TERA Series consisted of the inside-diameter Grinder, outside-diameter grinder and cutter
· FAG(Germany)Precision(PAS Grade) angular bearing is used and sealed with grease to maintain the fixing rate for long-time-using.
· When an order is taken, we negotiate the contents and ship bearings applied the pre-compressing to fit the purpose.
· Designed for selecting and assembling bearings and pre-compressing.
· Grinding Spindle Unit uses angular bearings for the front and back(DT assembling) and is applied the spring pre-compressing to support uniform load.
· Cutting Spindle Unit uses angular bearings for the front and back(DB assembling)
· The balance of a shaft is adjusted to drive even rotation and control the centripetal foce.
model | ΦA | L1 | ΦB | L2 | ΦC | L3 |
TRGB040160 |
40 |
160 |
15.5 |
43 |
15.5 |
30 |
TRGB040200 |
40 |
200 |
15.5 |
43 |
15.5 |
30 |
TRGB050160 |
50 |
160 |
15.5 |
43 |
15.5 |
30 |
TRGB050200 |
50 |
200 |
15.5 |
43 |
15.5 |
30 |
TRGB060180 |
60 |
180 |
23.5 |
60 |
23 |
46 |
TRGB060240 |
60 |
240 |
23.5 |
60 |
23 |
46 |
TRGB070200 |
70 |
200 |
23.5 |
60 |
23 |
46 |
TRGB070250 |
70 |
250 |
23.5 |
60 |
23 |
46 |
TRGB080250 |
80 |
250 |
23.5 |
60 |
23 |
46 |
TRGB080300 |
80 |
300 |
23.5 |
60 |
23 |
46 |
TRGB090250 |
90 |
250 |
23.5 |
60 |
23 |
46 |
TRGB090300 |
90 |
300 |
23.5 |
60 |
23 |
46 |
TRGB100300 |
100 |
300 |
23.5 |
60 |
23 |
46 |
TRGB110300 |
110 |
300 |
37 |
79.5 |
37 |
56 |
Dimension tera-trgc
- Accuracy Within 1/?
- Max. speed 29,000rpm
Special order for
We can respond to customers' special requirements, such as appearing in this catalog and in the spindle unit for length, outer diameter, alter or change the shape axis. Designed and manufactured to suit the customer's requirements, the spindle unit is also available. Please contact us if you do not have a device to meet the needs of customers in this catalog spindle. Let's examine whether the production can be applied.
Precision Unit TERA Series
· TERA-Precision Unit TERA Series consisted of the inside-diameter Grinder, outside-diameter grinder and cutter
· FAG(Germany)Precision(PAS Grade) angular bearing is used and sealed with grease to maintain the fixing rate for long-time-using.
· When an order is taken, we negotiate the contents and ship bearings applied the pre-compressing to fit the purpose.
· Designed for selecting and assembling bearings and pre-compressing.
· Grinding Spindle Unit uses angular bearings for the front and back(DT assembling) and is applied the spring pre-compressing to support uniform load.
· Cutting Spindle Unit uses angular bearings for the front and back(DB assembling)
· The balance of a shaft is adjusted to drive even rotation and control the centripetal foce.
model | ΦA | L1 | ΦB | L2 | ΦC | L3 |
TRGC019160 |
19 |
160 |
15 |
17.3 |
10 |
20 |
TRGC019200 |
19 |
200 |
15 |
17.3 |
10 |
20 |
TRGC028160 |
28 |
160 |
19 |
20.6 |
15.5 |
30 |
TRGC028200 |
28 |
200 |
19 |
20.6 |
15.5 |
30 |
TRGC034160 |
34 |
160 |
32 |
25.9 |
15.5 |
30 |
TRGC034200 |
34 |
200 |
32 |
25.9 |
15.5 |
30 |
TRGC042180 |
42 |
180 |
35 |
27.7 |
23 |
46 |
TRGC042240 |
42 |
240 |
35 |
27.7 |
23 |
46 |
TRGC050200 |
50 |
200 |
35 |
27.7 |
23 |
46 |
TRGC050250 |
50 |
250 |
35 |
27.7 |
23 |
46 |
TRGC063250 |
63 |
250 |
42 |
30.1 |
23 |
46 |
TRGC063300 |
63 |
300 |
42 |
30.1 |
23 |
46 |
TRGC063250A |
63 |
250 |
42 |
30.1 |
23 |
46 |
TRGC063300 |
63 |
300 |
42 |
30.1 |
23 |
46 |
TRGC063300A |
63 |
300 |
50 |
32.9 |
23 |
46 |
Dimension tera-trgf
- Accuracy Within 1/?
- Max. speed 13,000rpm
Special order for
We can respond to customers' special requirements, such as appearing in this catalog and in the spindle unit for length, outer diameter, alter or change the shape axis. Designed and manufactured to suit the customer's requirements, the spindle unit is also available. Please contact us if you do not have a device to meet the needs of customers in this catalog spindle. Let's examine whether the production can be applied.
Precision Unit TERA Series
· TERA-Precision Unit TERA Series consisted of the inside-diameter Grinder, outside-diameter grinder and cutter
· FAG(Germany)Precision(PAS Grade) angular bearing is used and sealed with grease to maintain the fixing rate for long-time-using.
· When an order is taken, we negotiate the contents and ship bearings applied the pre-compressing to fit the purpose.
· Designed for selecting and assembling bearings and pre-compressing.
· Grinding Spindle Unit uses angular bearings for the front and back(DT assembling) and is applied the spring pre-compressing to support uniform load.
· Cutting Spindle Unit uses angular bearings for the front and back(DB assembling)
· The balance of a shaft is adjusted to drive even rotation and control the centripetal foce.
model | ΦA | L1 | ΦB | L2 | ΦC |
TRGF080250 |
80 |
250 |
* |
25 |
40 |
TRGF080300 |
80 |
300 |
* |
25 |
40 |
TRGF090250 |
90 |
250 |
* |
25 |
40 |
TRGF090300 |
90 |
300 |
* |
25 |
40 |
TRGF100300 |
100 |
300 |
* |
25 |
40 |
TRGF110300 |
110 |
300 |
* |
25 |
40 |
TRGF120300 |
120 |
300 |
* |
25 |
40 |
Dimension trmc
trmc |